9. ON VEHICLE PROCEDURE A. REMOVAL OF FRONT STRUT ASSEMBLY 1. Remove wheel rim cover (if fitted). 2. Loosen wheel nuts. 3. Lift the vehicle using two-post lift allowing the front suspension to hang freely. 4. Unscrew wheel-mounting bolts and remove the wheel. 5. Remove ABS wheel speed sensor harness mounting bolt (if equipped). 6. Remove the Stab link and the brake hose mounting from the strut. 7. Unscrew the strut holding bolts (Camber bolt) from the Knuckle. 8. Remove the Leaf screen Cover. 9. Loosen & Remove strut top mounting Nuts.( 3 Nos) Remove strut assembly from bottom. 10. INSTALLATION: • 1. Carry out the above step in reverse order for its assembly. 2. Fit bolts and nuts. NOTE First, tighten top eccentric bolt and then the bottom-mounting bolt. 1. Tighten all bolts and nuts to specified torque mention in Torque table. 2. Apply ADH thread locker wicking grade ANABOND 124 at nut end and bolt thread. Ensure that the threads are free from oil/grease. SUSPENSION_PETROL 27
RkJQdWJsaXNoZXIy MTIwNTUz