Slide the boot seal into the seal groove on the 10. axle shaft and check the clamp position to ensure that it is positioned correctly around the entire circumference, then crimp the small retainer by using the crimping pincer tool Maintain the ear gap of 2.5 mm. Place the remaining grease from the service 11. kit inside the seal and slide the larger diameter of the seal with the larger seal retaining clamp in place over the outside of CV joint. Important: The CV seal must not be dimpled, stretched or out of shape in any way. If seal is not shaped correctly equalize pressure. Crimp the seal retaining clamp using pincer 12. tool and maintain ear gap of 2.6 mm. DRIVESHAFT DCT 25
RkJQdWJsaXNoZXIy MTIwNTUz