FITMENT 1. Place new O-ring (1) onto the back of the shaft of the BLDC-motor. 2.Mount the BLDC-motor (2) onto the transmission housing and take care to orient it in the correct way with the electric connector pointing into the direction of the drum. 3. Fix the motor with the 3 Bolts. 4. Manually turn the bolts for at least two full rotations before using a tightening tool. 5. Tighten all bolts to the final torque level specified in the External Specification using a calibrated tightening tool. NOTE Motors which have been dropped may not be used even if there are no visible exterior damages. Motors which have been disconnected from the transmission may not be mounted to another transmission. TOOLS T-P-1: Drum motor bolt bit Bit for Torx T25 Dual Clutch Transmission (DCT) 66
RkJQdWJsaXNoZXIy MTIwNTUz