7. Loosen and remove the mounting bolt and remove the temperature pressure sensor mounted on the intake manifold. 8. Remove the Fuel Rail along with the injectors. 9. Remove the injector retainer on the fuel rail. Remove the fuel injectors. 10. Loosen and remove the mounting bolts of the 11. bottom support bracket to the intake manifold. Removing the fasteners to take out the Intake 12. Manifold NOTE Injector should be tagged as soon as it is • removed to avoid chances of it being interchanged. Since the code of each injector is calibrated to the EMS, whenever an injector is replaced it codes of the respective injectors should be fed in the EMS ECU using diagnostic tool. Petrol Engine Ph-2 (CAFÉ)_DCT 123
RkJQdWJsaXNoZXIy MTIwNTUz