V. AIR CONDITIONER COMPRESSOR AND ALTERNATOR BELT REPLACEMENT The belt used in this vehicle is poly-v belt. Belt is supported with auto-tensioner which helps to maintain the belt tension for efficient power transmission. REMOVAL 1. Rotate the tensioner point by using ring spanner opposite to belt tension and remove the belt. INSTALLATION 1. Route the new belt through the crankshaft pulley, then the alternator and water pump pulley and then to the compressor and finally through the auto tensioner to the crankshaft pulley. 2. Rotate the tensioner point by using ring spanner opposite to belt tension and install the belt with the help of clevis meter measure the proper belt tension. CAUTION The belt is not interchangeable and should • not be interchanged with normal multi-ribbed belts. CAUTION Ensure that the tool is correctly located • during the belt fitment process. Make sure that while rotating the crank shaft pulley the belt should not slip away from AC Compressor pulley. Petrol Engine Ph-2 (CAFÉ) 63
RkJQdWJsaXNoZXIy MTIwNTUz