Remove Outer race cylindrical roller bearing of 26. lay shaft from front housing with the help of puller 5438 5980 2617. PROCEDURE FOR REMOVAL OF LAY OR COUNTER SHAFT BEARING Position the transaxle RH side case, facing the • bearing in upward direction. Take the bearing puller (5438 5809 2617) and • place outer hub of the puller on the machined surface of transaxle casing, surrounding of the countershaft bearing. Rotate the pulling nut 30 mm anticlockwise and • allow anchoring body shaft of puller to get inserted inside the bearing. Once the anchoring body is inserted fully, hold • the locking stud on the top using open end spanner 8 mm and turn the locking nut on the top slowly using open end spanner 17 mm, few turns till it gets resistance to rotate. Transaxle AMT 44
RkJQdWJsaXNoZXIy MTIwNTUz