Allow the engine to return to idle speed. 14. Stop the engine and allow to cool sufficiently. 15. Add pre-mixed 40:60 ratio coolant to the 16. reservoir until the coolant level is at the ‘MAX’ mark on the bottle. COOLANT FILLING (DE - AREATION III. PROCEDURE) METHOD 1 Using Radiator Check and Fill system Kit. Kit Radiator check & Fill System (8855 WORK 0087) 1. Take the specified premixed coolant in a clean container preferable having measuring scale, approximately 10% more than the specified coolant capacity of the vehicle (e.g. if the coolant capacity is 6 ltr then take 6.6 ltr). 2. Connect pneumatic line using commercially available suitable QRC. Install the cone adapter from the kit to the vacuum gun and. Put the coolant filler hose into the coolant container; ensure that the filler hose will always be submerged. NOTE Prior to start the process, drain and flush • coolant system. Diesel Engine Ph-2 (CAFÉ) 54
RkJQdWJsaXNoZXIy MTIwNTUz