REMOVAL 1. Disconnect the battery connections. 2. Remove lower nacelle assembly. (For removal refer Body section) 3. Insert screw driver into hole from both sides and press to unlock the DAB assembly. 4. Disconnect the DAB connector coming from clock spring and disconnect the horn pad connection and take out the DAB assembly from the vehicle. FITMENT For fitment follow reverse procedure of removal. CAUTION Just press & fit the airbag and it is to be • insure that it is fitted properly. Since Driver Airbag is having Illuminated • emblem with High Gloss Deco part on TOP, following caution should be taken. 1. Cleaning Agents like Collin, Acid Cleaners, Polisher, Sanitizer should not be applied on High gloss Deco part. 2. Deco part can be wiped with soft cloth wetted with water. NOTE After fitment connect the diagnostic tool and • clear all fault codes if any. SRS 22
RkJQdWJsaXNoZXIy MTIwNTUz