Remove WPC ECU assembly connector. 11. Take out the WPC ECU assembly from trim 12. panel. FITMENT: 1. Connect back the wiring harness connector to the WPC ECU connector. 2. Locate the new WPC ECU assembly on bracket the help of 2 locking. 3. Fix the new WPC ECU assembly on bracket the 2 screws with tightening torque 2.5 Nm. NOTE Maintain the trim and ECU surface flushness • of 0.5mm. The distance between upper housing & axis • of positive mounting hole should be 16.5mm. The distance between fan duct cover & axis • of positive mounting hole should be 13mm. Ensure that harness connector for the WPC • ECU connector is fitted tightly with applicable torque mentioned on the component drawing. ELECLTRICAL 306
RkJQdWJsaXNoZXIy MTIwNTUz