FUEL GAUGE III. NEXON MCE2 10” Instrument Cluster When the ignition switch is in “ON” position, fuel • gauge gives an approximate indication of the amount of fuel in the fuel tank. “F” stands for full and “E” stands for Empty. When fuel in the tank is near to empty position, • low fuel warning telltale turns Amber. Refill the tank as soon as possible. At every key in and Ignition ON, Fuel Gauge • Bars move to F and come back to E position. This is welcome strategy. Fuel gauge graphics color changes depends on • the fuel availability on fuel tank as per below in the draining direction. NOTE On inclines, curves, during braking and • sudden acceleration due to the movement of fuel in the tank, the fuel level display may fluctuate or the low fuel level warning lamp may turn ON/OFF earlier or delayed than usual. When the ignition switch is in the “ON” • position, this gauge gives an approximate indication of the amount of fuel in the fuel tank and it takes few seconds to stabilize after the ignition is turned ON. WARNING When Cluster detect Low Fuel level, It blinks • last fuel bar with 1Hz frequency and Fuel tank symbol is continue ON state If there is any fault in the system, Low fuel • warning symbol shall blink. Take your vehicle to the nearest TATA MOTORS authorized service station. ELECLTRICAL 188
RkJQdWJsaXNoZXIy MTIwNTUz