TEMPERATURE GAUGE IV. NEXON MCE2 7” Instrument Cluster When the ignition switch is in the “ON” position, • this gauge indicates the engine coolant temperature. The indicator should be within normal, • acceptable temperature range i.e., between “H” and “C”. If the indicator approaches “H”, overheating is indicated by red LED bar in case of 4” and red bar LED Indication in case of 7”. If the coolant temperature reading is very high, • The Engine coolant temperature telltale flashes with an audible buzzer. In this case, stop the vehicle, switch ‘OFF’ the • engine and cool it down for some time. Contact a nearest TATA MOTORS Authorized Service Centre immediately for rectification. NOTE On inclines, curves, during braking and • sudden acceleration due to the movement of fuel in the tank, the fuel level display may fluctuate or the low fuel level warning lamp may turn ON/OFF earlier or delayed than usual. When the ignition switch is in the “ON” • position, this gauge gives an approximate indication of the amount of fuel in the fuel tank and it takes few seconds to stabilize after the ignition is turned ON. WARNING When Cluster detect Low Fuel level, It blinks • last fuel bar with 1Hz frequency and Fuel tank symbol is continue ON state If there is any fault in the system, Low fuel • warning symbol shall blink. Take your vehicle to the nearest TATA MOTORS authorized service station. ELECLTRICAL 158
RkJQdWJsaXNoZXIy MTIwNTUz