6. Steering lock cum ignition switch mounting screws are anti loosening. To remove the Ignition lock, screw to be loosened by using flat screw driver and hammer. 7. Remove assembly of SLCIS. REFITMENT 1. Refit SLCIS and tighten its mounting screws. 2. Reconnect SLCIS connection. 3. Refit combination switch. 4. Refit steering Wheel. 5. Refit steering nacelle. 6. Refit battery negative terminal. CONNECTION DETAIL PIN DETAIL CONTACTS MINIMUM. PERMANEN T LOAD CURRENT AT TEMP - 30°C MAXIMUM. PERMANEN T LOAD CURRENT AT TEMP +23°C TO +85°C Battery – Key IN Sensor 10 mA 30 mA Battery - ACC 250 mA 2 A Battery - ON 250 mA 2 A Battery - Start 10 mA 250 mA ELECLTRICAL 51
RkJQdWJsaXNoZXIy MTIwNTUz