3. Remove the mounting bolt and take out the side-mounted High tone horn. INSPECTION OF HORN Connect the positive terminal of the horn to battery (+) and negative terminal to battery (-). If a clean and sharp sound is heard, the horn is OK. If no sound is heard, check continuity of the horn coil using a multi-meter. If the coil is OK, check the settings of the setting screw. Adjust the setting screw till a clean and sharp sound is given out. REFITMENT: For refitment follow the procedure in reverse. HORN –TORQUE VALUE TABLE CONNECTIONS DETAILS For circuit details refer circuit schematic section APPLICATION TORQUE Horn MTG Bkt 0.81 to 1.0 Kgfm CONDITION POSSIBLE CAUSES CORRECTION/REFERENCE ITEM Horn not working 1. Horn fuse (15A) in Engine fuse box blown Replace the fuse 2. Horn relay on Fuse box loose Fix the relay properly 3. Horn switch terminal / horn switch contact in steering pad improper Replace control switch plunger topping/Adjust horn switch contact in steering pad properly Horn sound distorted 1. Horn terminals loose Connect the terminals properly 2. Horn setting screw disturbed Adjust the setting screw till a clean and sharp sound is obtained ELECLTRICAL 32
RkJQdWJsaXNoZXIy MTIwNTUz