3. Remove both the Lumberg connectors. 4. Take New Driver with Serviceability cap. 5. Ensure the gasket fitted properly. 6. Assembly the connectors on driver & insert the Driver assembly into the HL. 7. After inserting the Driver assembly, assemble the cap with the help of two screw. 8. Ensure the Torque applied at the time of screwing is 0.6 to 0.8 n-m. NOTE Driver Replacement do only in ESD protected environment. ELECLTRICAL 23
RkJQdWJsaXNoZXIy MTIwNTUz