6. Remove electrical connection of window winding motor. 7. Remove Window regulator rail with Motor assembly from Door assembly. 8. Remove three mounting bolts of window winding motor. 9. Remove the motor assembly with gearbox from the rail. FITMENT For fitment follow the reverse procedure of removal. P. REAR DOOR REMOVAL Remove the “B” pillar trim. (For procedure refer 1. “B” pillar trim removal process.) 2. Remove electrical connection of door wiring harness. 3. Remove the check strap. NOTE During fitment of front door glass first fit the window winding motor. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. BODY 28
RkJQdWJsaXNoZXIy MTIwNTUz