B. COMPRESSOR REMOVAL AND ASSEMBLY 1. Discharge the refrigerant using standard recovering equipment. Refer maintenance section. 2. Remove the AC Compressor belt; refer AC Compressor belt removal procedure. 3. Disconnect Electrical connection to compressor. 4. Disconnect the Suction line and the discharge line. 5. Loosen and remove the mounting bolts (1) and remove Compressor. FITMENT For fitment, follow the reverse order of removal. Tighten the following fasteners to the recommended torque. i) Compressor mounting. ii) Refrigerant lines on compressor. C. BLOWER REMOVAL AND ASSEMBLY 1. Remove the driver lower panel located below dashboard top panel. 2. Disconnect electrical connections. 3. Remove dashboard with cross car beam assembly. (For procedure, refer dashboard removal with cross car beam in body section) 4. Loosen and remove three mounting bolts and separate the blower from the HVAC assembly. FITMENT For fitment, follow reverse procedure of removal. HVAC W/O ETC 44
RkJQdWJsaXNoZXIy MTIwNTUz