RADIATOR FAN SHROUD REMOVAL 1. Drain the coolant and remove the Coolant tank. (For procedure refer “Coolant Replacement” in Engine maintenance section) 2. Disconnect the electrical connections to the radiator fan. 3. Remove the two fasteners to separate fan shroud. 4. Pull out the shroud from the top. FITMENT For fitment slide the shroud into the mounts till it snaps at the top mounts. THERMOSTAT REMOVAL Drain the coolant. (Refer “Coolant Replacement 1. Procedure). 2. Access the thermostat either from front right wheel side by removing the arch liner or from top by removing air filter assembly. 3. Remove all the spring band clip and disconnect all the hose connections. Remove the cover mounting nuts. 4. FITMENT For fitment follow the reverse order of removal. Tighten fasteners to the recommended torque. Thermostat cover mounting: M6 Bolt- (1 Kg-m) Petrol Engine Ph-2 (CAFÉ) 119
RkJQdWJsaXNoZXIy MTIwNTUz