6. Re-install the calliper in the carrier. 7. Assemble the wheel again. B. REMOVAL OF FRONT BRAKE DISC 1. Position the vehicle on two-post lift and remove front wheels. 2. Remove two bolts of brake caliper assembly. 3. Release caliper assembly and tie aside clear off from brake disc. 4. Remove brake disc screws (02 nos.) securing brake disc to the hub. NOTE Re-install the calliper in the carrier, screw the • banjo bolt (with copper gasket) to the recommended torque, then release the hose clamp, do bleeding operation and check for correct function of the calliper parts, ensure no drag and frictional noise. CAUTION Do not allow caliper to hang on brake hose • as it may damage the hose. BRAKE_DIESEL 41
RkJQdWJsaXNoZXIy MTIwNTUz