Remove the Engine A-mount arm mounting 32. nuts (3 nos) from engine side. Remove the Engine “C” mount by removing 33. the mounting bolts. Now move the two post lift upwards and place 34. the support stand under the engine. (Use a suitable wooden block or other support for additional height as necessary). Now slightly lower the lift until engine and 35. transaxle assembly is securely placed / fix on the support stand. Disconnect the lifting crane from the engine. 36. Now carefully move the lift up. 37. Take out the engine and transaxle assembly 38. along with support stand. Remove the starter motor, alternator along with 39. its mounting brackets. Remove the transaxle from the engine. 40. Fix the LH & RH mounting brackets to the 41. engine. Safely lift the engine with the help of crane and 42. fix it on overhaul stand. SPECIAL TOOL Engine Support stand -: 5424 5890 24 01 • CAUTION Use care when raising the vehicle off the • engine and transaxle assembly. Verify all components and electrical connections are disconnected prior to raising the vehicle, or vehicle damage occur. SPECIAL TOOL LH Mounting Bracket -: 5424 5890 24 03 • RH Mounting Bracket -: 5424 5890 24 02 • Petrol Engine Ph-2 (CAFÉ) 100
RkJQdWJsaXNoZXIy MTIwNTUz