6. TUNING DATA SELECTION In order to selection the correct turning data for the vehicle, TML need to be explicitly write the tuning selection data at their EOL, otherwise no motor output from EPAS system, and system will go to error state, the error lamp will be on. This needs to be done in order to verify the selection. Only in the next ignition cycle, the selection will be active. CONFIGURATION SELECTION According to TML Requirement for ABS / Non - ABS & TCU/Non-TCU shall be selected by diagnostic tools. The corrected selection can be avoid the fault information from the CAN network. DID VALUE AND DESCRIPTION 6214 03 ABS TCU 6214 02 ABS Non - TCU 6220 01 ESS 6220 00 Non ESS 6215 01 Petrol 6215 02 Diesel STEERING_MANDO 41
RkJQdWJsaXNoZXIy MTIwNTUz