OBJ ON-VEHICLE REMOVAL IV. V. DO’S & DON’TS DON’TS 1. Never lift steering gear by holding bellows. 2. Never store steering gear resting on its bellows. 3. Never store / transport steering gear with bellows fouling with other objects. 4. Never remove port plug before connecting with mating parts. 5. Never use cotton waste which will cause contamination. 6. Do not adjust ball joint nuts except during wheel alignment 7. Never lift steering gear by holding IBJ’s. 8. Do not remove the protective cap from the input shaft during transit or before assy. 9. Do not remove the protective cap from the OBJ during transit or before assy. Do not use cotton waste for cleaning. 10. Don’t hit or hammer steering wheel to avoid 11. capsule collapse & column serration damage. Image for illustration purpose only Don’t use improper packing parts or fell down 12. parts possibilities of column tube collapse. Column collapsed & marking disturbed. 13. While removing don’t hit on cross car beam. 14. Don’t keep the part directly on floor. 15. NOTE RAP need not be removed; to remove OBJ • on vehicle disconnect the OBJ at Steering Knuckle. STEERING_MANDO 23
RkJQdWJsaXNoZXIy MTIwNTUz