REMOVAL OF LOWER ARM RUBBER IV. BUSHES A. Lower arm front pivot bush Removal: 1. Remove front pivot bush using special tools as shown in below arrangement. Installation: 2. Install pivot arm bush using special tools as shown in below arrangement. B. Lower arm Rear pivot bush Removal: 1. Remove rear pivot bush using special tools as shown in below arrangement. Installation: 2. Install rear pivot bush using special tools as shown in below arrangement. NOTE Apply soap and water to the bush, the inner • surface of the tool and the bore of assembly lower link before installation. NOTE Load should be applied concentric to the • bush axis to avoid improper fitting of bush into the housing. NOTE Apply soap and water to the bush, the inner • surface of the tool and the bore of assembly lower link before installation. SUSPENSION_DIESEL 32
RkJQdWJsaXNoZXIy MTIwNTUz