Remove the crankshaft gear by removing the 14. pin. Lock the balancer shaft in the bedplate using 15. a locking bolt (5715 0310 9904) as shown below. Remove the mounting bolt of the balancer 16. shaft gear and take out the gear. REMOVAL OF CYLINDER HEAD AND VII. CAMSHAFT 1. Remove the Cylinder Head attaching bolts along with the washers, starting from the ends of the cylinder head and working inwards to the center. 2. Remove ITG Bearing Cap Upper. 3. Remove two camshafts. 1.2L REVOTRON CNG PHASE-2 ENGINE 170
RkJQdWJsaXNoZXIy MTIwNTUz