FITMENT 1. Insert the new o-rings on their seats in the Filter Cap. Be sure that each O-Ring is duly inserted on its seat. 2. Insert the new O-Ring on its seat in the lower plastic body. Be sure that each O-Ring is duly inserted on its seat. 3. Insert the new filter cartridge in the Filter cap. The filter cartridges have to be positioned at on its pin located on the lower part of the body. 4. Screw the Cap Filter and the lower body filter manually. Be sure that the Cap Filter O-rings don’t leave their seats during this operation. CAUTION Ensure the O-Rings are new. Old o-rings are not mixed with new o-rings. CAUTION Ensure the O-Ring is new. Old o-ring is not mixed with new o-ring. CAUTION Ensure the cartridge is new. Old cartridge is not mixed. CAUTION Ensure minimum size of across flat should • be 10.00mm. Ensure tightening torque should be15±2 Nm. • 1.2L REVOTRON CNG PHASE-2 ENGINE 64
RkJQdWJsaXNoZXIy MTIwNTUz