Alternative method for flushing operation for cleaning the catalytic converter is by directing dry compressed air draft (3 to 4 bar) in the direction of catalytic converter inlet, after removing it from the vehicle. AVOID Push start or tow-starting the vehicle. (Use • jump leads). Long (not more than 10 seconds) repeat (not • more than 3 times) starting of the vehicle. Investigate the cause for difficulty in starting and rectify the same. Long idling (to warm-up) if the engine is running • rough, after a cold start. Switching “OFF” the ignition when driving down • the hill. Fuel almost empty. • Pre- Coating/Painting of Catalytic Converter • Blockages in the exhaust can create back • pressure, low top speed, poor pick up, black smoke, carbon build up and low mileage. Excessive carbon build-up / sticky valve. • Damaged vacuum lines. • The Catalytic converter should not be dropped • from a height. If dropped, it should not be used. WARNING Avoid parking of vehicle over inflammable materials, such as dry leaves; grass etc. as exhaust system is hot enough to initiate fire. CAUTION Ensure exhaust system and catalytic converter is not blocked and is free from obstruction. CAUTION The Catalytic converter should not be dropped from a height. If dropped, it should not be used. 1.2L REVOTRON CNG PHASE-2 ENGINE 112
RkJQdWJsaXNoZXIy MTIwNTUz