1.5L REVOTORQ ENGINE 181 vi. RAIL PRESSURE SENSOR This sensor is fitted on the fuel rail and gives a close loop control of the rail pressure. Fuel is maintained at a high pressure in the fuel rail depending on requirement of the engine. SENSOR LOCATION CONNECTOR DETAILS PINOUT DETAILS Pin No Description 1 Output Signal 2 Ground 3 Supply Voltage vii. THROTTLE PEDAL SENSOR This sensor tells the ECU about the position of the accelerator pedal. This input is used to determine the torque required to drive the vehicle which in turn determines the requirement of fuel quantity. This is a dual potentiometer sensor for the safety & correct inputs (Driver's request/Throttle position) to ECU. Throttle Pedal sensor checking values 1.25K ohm +/- 20% between terminals 1 & 5 0.9K ohm +/- 20% between terminals 2 & 4 Operating Voltage : 5V±10% Operating Temperature : -300C to 850C Storage Temperature : -400C to 900C Maximum Load Current : ≤ 10mA WIRING DIAGRAM
RkJQdWJsaXNoZXIy MTIwNTUz