1.5L REVOTORQ ENGINE 95 33. Remove the mounting bolts of the exhaust pipe front and disconnect the pipe. 34. Disconnect the electrical connection of engine wiring harness and the main vehicle wiring harness. 35. Remove front two tyres. 36. Disconnect the left and right drive shafts from the vehicle. (For removal procedures refer Transaxle section). 37. Disconnect the ground wire on the gear box. 38. Use suitable belt/chain to fix a zip crane to the engine lifting hooks located at front and rear of the engine. 39. Raise the crane slightly up until very light pressure is applied to the engine. 40. Loosen and remove the “C” mount assembly mounting fasteners. Tilt back the mount assembly.
RkJQdWJsaXNoZXIy MTIwNTUz