1.2L REVOTRON ENGINE 102 NOTE Insert the tool in bearing cap holes one by one and tighten the fasteners to ensure the proper alignment of bearing cap... 8. Assemble the ITG Bearing Cap Upper with the mounting fasteners. 9. Assemble the Cylinder Head cam cap bolts along with the washers, starting from the ends of the cylinder head and working inwards to the center. (Keep the arrow of cap in outward direction.) 10. Apply sealant as shown below. 11. Assemble the rear intermediate bearing cap. 12. Bolts to be oiled at treads and seating surface. Tighten the assemblies in sequence as shown below with 1.5 ± 0.15kgfm torque:
RkJQdWJsaXNoZXIy MTIwNTUz