1.2L REVOTRON ENGINE 86 7. To dislocate cylinder head, use a soft mallet or dead-blow hammer to break the head free from the block, if necessary. 8. Place the cylinder head on the dismantling table. VIII. Removal of Cylinder Head SubAssemblies NOTE To avoid damage to valve tips, do not rotate the camshaft. 1. Remove the RFF along with Hydraulic Lash Adjuster (HLA) from the cylinder head as shown in figure below. 2. Using Special Tool, to compress and remove the valve spring lock halves. CAUTION Use only special tool for removing the lock halves. Not adhering could result in injury.
RkJQdWJsaXNoZXIy MTIwNTUz