1.2L REVOTRON ENGINE (DCT) 38 25. Remove the “A”- mounting bracket nuts (3 nos) from engine side. 26. Remove the “C” mount. 27. Using hydraulic support stand lower the engine from engine bay and remove engine from vehicle. (Use a suitable wooden block or other support for additional height as necessary.) CAUTION Take care when lowering the engine off the vehicle. Verify all components and electrical connections are disconnected prior to raising the vehicle, or vehicle damage occurs. 28. Now slightly lower the lift until engine and transaxle assembly is securely placed / fix on the support stand. SPECIAL TOOL Engine Support stand -: 5424 5890 24 01 29. Disconnect the lifting crane from the engine. 30. Now carefully move the lift up. 31. Take out the engine and transaxle assembly along with support stand. 32. Remove the engine wiring harness and starter motor. Remove the engine wiring harness. 33. Remove the gearbox along with clutch from the engine. (Refer Gearbox and clutch section for removal procedure).
RkJQdWJsaXNoZXIy MTIwNTUz