FITMENT 1. Tighten the Catcon and front assembly. 2. Tighten the mounting bolt of front pipe on C mount bracket CLOSED COUPLED CATALYTIC CONVERTER 1. Remove the mounting bolts of the front exhaust pipe and disconnect front pipe. 2. Disconnect electrical connection to both lambda sensor. 3. Remove the heat shield of CCC. NOTE All joints to be first aligned and hand tightened. Catcon and front assembly to be fully tightened before bracket tightened on C mount joint. NOTE Use new gaskets every time while fitment and tighten nuts and bolts to specified torque. All joints to be hand tightened first and then follow above sequence 1,2,3. 1.2L REVOTRON PHASE-2 ENGINE 91
RkJQdWJsaXNoZXIy MTIwNTUz