BODY 56 AO. GLASS FIXING OF WIND SCREEN GLASS & TAIL GATE GLASS The glasses are directly pasted to sheet metal flanges using sealant. We give below the Equipment / materials required and the procedure for fixing the Wind screen and Backlight glasses. EQUIPMENTS REQUIRED: 1. Pneumatic applicator gun with holding arrangement for sealant cans. 2. Vacuum cups for holding glasses. 3. Tensioner Belt for holding Rear Quarter Fixed glass. SR.NO Preparation on Glass (Windshield and Tail Gate Glass) Preparation on Body shell 1 Clean the glass with cleaner Betaseal 43518. Allow it to dry completely. Assemble the rubber mould to the glass. Clean the Body shell flange area conforming to glass with Cleaner Betaseal 43518. Allow it to dry completely. 2 Apply a thin and even (Approx. 0.5 mm thick wet layer) of Primer Betaseal 43520A on Allow it to dry for minimum 2 minutes. Apply a thin and even coat (Approx. 0.5 mm thick wet layer) of Primer Betaseal glass.43533AT on painted surface. Allow it to dry for minimum 2 minutes. 3 Fill up the mould groove with Sealant Betaseal 58702 with the applicator gun. (This sealant at later stage spreads on glass and mating shell flange area, when glass is fixed.)
RkJQdWJsaXNoZXIy MTIwNTUz