BODY 31 6. Disconnect the inner handle cable from the door inner lock handle. 7. Loosen and remove three door latch mounting screw. 8. Disconnect outer handle link from the handle end. 9. Remove the latch. FITMENT For fitment follow reverse procedure of removal. T. TAIL GATE REMOVAL 1. Open the tail gate. 2. Pull out Access cover tail lamp located inside the “C” pillar trim 3. Disconnect the tail gate all wiring harness located inside the “C” pillar trim and pull out the wiring harness from outside. 4. Pull halfway the metallic clip present on ball pin socket from both side and remove the gas balancer. Follow the same procedure at other end.
RkJQdWJsaXNoZXIy MTIwNTUz