BODY 15 7. Remove combination switch assembly and ignition switch assembly (For procedure refers combination switch and ignition switch removal process in Electrical section.) 8. Remove two upper steering column and lower steering column mounting nuts. 9. Disconnect the electrical connection. 10. Remove music system (If applicable). (For procedure refer music system removal process in Electrical section). 11.Remove floor console assembly. (For procedure refer floor console removal process). 12. Pull out at end cover LH side 13. Remove ‘A’ pillar upper and lower trim. (For procedure refer ‘A’ pillar trim removal process.) 14. Remove two mounting screw near ‘A’ pillar.(LH,RH) 15. Open the Bonnet. 16. Pay out seven Grommet pin and pull out plenum cover. 17. Remove Front Wiper (For procedure refers Front Wiper removal process in Wiper section.)
RkJQdWJsaXNoZXIy MTIwNTUz