BODY 13 15. Remove lower side & outboard side screws of glow box assembly and pull out glove box 16. Remove PAB Assembly (If applicable). (For procedure refer PAB removal process in SRS section). 17. Remove ‘A’ pillar Lower trim. (For procedure refer ‘A’ pillar trim removal process.) 18. Remove two mounting screw near A pillar.(LH,RH). 19. Before removing mounting bolts of Dashboard Panel need to Remove Display Bezels (Cap & Lower Bezel) & 7” Display. Also disconnect electrical connection of 7” Display unit 20. Before removing mounting bolts of Dashboard Panel need to remove PAB Assembly after removal of Glove Box assembly & disconnect its electrical connection 21. Remove mounting bolts of dashboard (17 bolts (M6 x 16) + 1 nut)
RkJQdWJsaXNoZXIy MTIwNTUz