LV ELECTRICAL SYSTEM 155 NOTE: Maintain the trim and ECU surface flushness of 0.5mm. The distance between upper housing & axis of positive mounting hole should be 16.5mm. The distance between fan duct cover & axis of positive mounting hole should be 13mm. Ensure that harness connector for the WPC ECU connector is fitted tightly with applicable torque mentioned on the component drawing. 4. Assemble the Upper floor console. 5. Place back the anti-skid mat on surface of the mounted WPC ECU. NOTE: Anti-skid mat shall be properly fitted and no waviness shall observe on anti-skid mat. 6. Take console assy & fit the regeneration switch in console. 7. Connect the connector of regeneration switch.
RkJQdWJsaXNoZXIy MTIwNTUz