BODY 11 ARM REST REMOVAL NOTE For ease of removal and fitment the hand brake cable can be loosened from the rear end. (For the hand brake adjustment, refer brake section.) 1. Remove the gear lever boot. (For procedure refer the gear lever boot removal process.) 2. Pull the Armrest up ward direction. 3. Remove Console Hinge cover. 4. Remove rear screw of central floor console. 4.3. DASHBOARD SKIN (Top Panel Assembly including duct assembly, PAB Chute, Air Vent assembly etc.) REMOVAL 1. Remove steering wheel with Driver air bag (if applicable) (For procedure refer steering wheel removal process in steering section.) 2. Remove End Cap RH. Pull out Driver lower panel. 3. Remove nacelle Assembly. Nacelle Upper assembly detached from Nacelle Lower & Cluster Cover (Gap Hider which is a part of Nacelle Upper is attached to Cluster Cover by rib locks) (For removal refer steering column removal process in steering section) 4. Remove Nacelle Lower (by removing three screws with steering column) 5. Remove combination switch assembly and ignition switch assembly (For procedure refers combination switch and ignition switch removal process in Electrical section)
RkJQdWJsaXNoZXIy MTIwNTUz