LV ELECTRICAL SYSTEM 120 23.2 START STOP SWITCH A Start Stop Switch (SSSW) or Push to Start Button is a main component of Passive (Engine) Start and Stop system. It is used to control ACC, IGN outputs as well as to start and stop the engine. It is provided with LED to indicate different states. • OFF (No color) • ACC ON (Amber) • IGN ON (Green) • CRANK ON (Green) • Engine Run (Green) A. LOCATION B. PINOUT DETAILS C. CONNECTOR DETAILS PIN DESCRIPTION 1 Switch 1 Signal 2 Switch 1 GND 3 Switch 2 Signal 4 Switch 2 GND 5 ACC LED 6 IGN LED 7 BACK LIGHT + ve 8 BACK LIGHT - ve 9 RING LED - ve 10 RING LED (+) D. REMOVAL 1. Remove dashboard mid panel. (Refer Body Section for removal procedure). 2. Disconnect the electrical connection to the switch.
RkJQdWJsaXNoZXIy MTIwNTUz