E-DRIVE REMOVAL E. Refer Instructions for working on HV 1. Components mention before starting work. Disconnect and remove all LV electrical wiring 2. harness. Remove Mud Liner RH. 3. Loosen and Remove the mounting screws & 4. nut of splashguard. Loosen and remove the mounting nut of tyre & 5. take out (LH / RH side ) Loosen and remove the boll joint bolt of lower 6. arm to axle both LH & RH side. Apply brake and remove drive shaft lock nut on 7. both LH and RH side. Drain the coolant and Remove the pump. 8. (Refer coolant pump section for removal process). Remove drive shaft by pulling disk brake and 9. Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). HIGH VOLTAGE ELECTRICAL SYSTEM (HV) 59
RkJQdWJsaXNoZXIy MTIwNTUz