SYSTEM LAYOUT 2. RESTRAINT SYSTEM WITH AIRBAG This Vehicle is equipped with 3 loops of Air bag systems. The layouts of this loop is given below. DRIVER AIRBAG MODULE (DAB) • Fitted on the steering wheel with a horn pad having tear seams.+ PASSENGER AIRBAG MODULE (PAB) • Integrated type, rigidly attached to cross member with dashboard visible surface having tear seams in the area covered by the PAB module. SRS CONTROL UNIT • Fitted on the floor tunnel along the centre line of the vehicle under the center console. AIRBAG WARNING LAMP • Fitted inside instrument cluster. RPLL AND ELR + LL CONFIGURATION • BELTS Fitted inside B pillar - RH side Retractor Pretensioner and Load Limiter (RPLL) & for LH side Emergency Locking Retractor + Load Limiter (ELR+LL). OCCUPANT DETECTION SENSOR(ODS) • Occupant Detection sensor (ODS) detects occupant in passenger seat. This information is then used by a seat belt reminder system in the vehicle to trigger a warning light and/or an audible chime reminding unbuckled seat occupants to fasten their seat belts. FRONT IMPACT SENSOR(FIS) (RH & LH) • These sensors are mounted on vertical members of front-end module on the both side i.e. RH & LH. SRS 3
RkJQdWJsaXNoZXIy MTIwNTUz