PLENUM COVER REMOVAL AH. REMOVAL Remove the bonnet. ( Refer Removal 1. procedure of Bonnet) Disconnect the negative terminal of battery. 2. Remove both front wiper arm and blade 3. assembly. (Refer wiper arm and blade assembly removal process). Remove Hood Seal. 4. Remove the mounting screw and take out the 5. plenum trim brackets. Pry out seven Grommet Pins. 6. FITMENT For fitment follow reverse procedure of removal. BONNET INSULATION REMOVAL AI. Open the bonnet. 1. Pull out the insulation from the bonnet 2. assembly. FITMENT For fitment follow reverse procedure of removal. NOTE While pulling out the Bonnet insulation, care should be taken such that clips do not get damage if found damaged replace the same with the new one. BODY 51
RkJQdWJsaXNoZXIy MTIwNTUz