Loosen and remove three door latch mounting 7. screw. Disconnect outer handle link from the handle 8. end. Remove the latch. 9. FITMENT For fitment follow reverse procedure of removal. TAIL GATE REMOVAL R. Open the tail gate. 1. Disconnect the tail gate wiring harness located 2. inside the “C” pillar trim and pull out the wiring harness from outside. Pull halfway the metallic clip present on ball pin 3. socket from both side and remove the gas balancer. Follow the same procedure at other end. Remove the top hinge mounting of the tail gate 4. by removing two mounting bolts. Follow the same procedure at the other end and separate the tail gate from the vehicle. BODY 33
RkJQdWJsaXNoZXIy MTIwNTUz