Detach the hand brake cable from the lever on 11. the trailing shoe by moving the lever towards the center of the brake and removing the cable nipple from its location in the end of the lever. Remove the hand brake cable holder lock pin 12. from the back plate Remove the mounting bolt of hand brake cable 13. on the twist beam axle Disconnect the brake lines mounting on the 14. twist beam. Remove the stub axle and back plate along 15. with brake shoe assembly. Remove the shock absorber lower bolts (Refer 16. removal and refitment of shock absorber). Loosen and remove the twist beam bracket 17. bolts on both sides. Lower the twist beam along with bracket. 18. NOTE Remove old thread locker residue from bolt as well as internal threads. Apply adhesive thread locker HS TS: 25408 on anchor plate mounting bolts (thread locker code no: 56506 00256 2) for fitment. FRONT & REAR SUSPENSION 51
RkJQdWJsaXNoZXIy MTIwNTUz