INSTALLATION Proceed in the reverse order of fitment. 1. Replace rubber bushes, worn damaged parts. 2. Tighten the rear mounting bracket bolts with 3. proper torque. Insert the lower link ball pin in to knuckle and 4. tighten the nut. Insert the LCA bracket and tighten the nuts. 5. Tighten the Vertical member. 6. Ensure that heat shield is assembled properly 7. on ball joint. Ensure torqueing to be done at ECIE/ Preload 8. condition. NOTE Ensure no gap between LCA mounting face, washer and LCAmounting pin before final torque at all joints. Torqueing Sequence Joint 1 - Joint 2 - Joint 3. NOTE Ensure the position & orientation of the Clamp of the vertical member. FRONT & REAR SUSPENSION 37
RkJQdWJsaXNoZXIy MTIwNTUz