Remove the tripot spider assembly from the 6. axle shaft as showing below figure. If required tab the spider assembly gently using a nylon mallet. Clean the following items thoroughly with 7. cleaning solvent. Remove all traces of old grease and any contaminates. Tripot balls • Needle rollers • Housing • Dry all the parts. Inspect these parts for 8. damage or wear. (If any of the parts are damaged, the entire sub- assembly along with the outer housing needs to be replaced.) After this remove the rubber boot from the axle 9. shaft. DRIVESHAFT 10
RkJQdWJsaXNoZXIy MTIwNTUz