FUSE AND RELAY REPLACEMENT Remove the driver lower panel (Refer Body 1. section). Take out the fuse and relay from its base. 2. Check the Fuse/relay. 3. If faulty replace with same ratting of fuse and 4. relay. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. NOTE: Use designated fuses only. Refer BOOK 2 for DTCs Refer BOOK 3 for CIRCUIT SCHMATICS. LV SYSTEM 140
RkJQdWJsaXNoZXIy MTIwNTUz