SECOND ROW SEAT BELT ELR REMOVAL Disconnect the battery connection. 1. Fold the second row seat. 2. Remove bottom anchorage bolt on the rear 3. seat belt. Remove belt from parcel shelf. 4. Remove the mounting bolt from parcel shelf 5. panel and take out the assembly. FITMENT Follow reverse procedure for fitment. CLOCK SPRING VI. Clock spring is a spirally wound wire coil (not a slip ring) mount to steering column. This single-wire type contact reel (clock spring) design ensures most reliable contact possible between air bag module assembly and SRS ECU. It also provides the electrical continuity for airbag, horn, vehicle cruise control and infotainment system. The clock spring only needs to be replace when the connectors that attach to the driver’s airbag is melted and fused directly to the DAB module. During a deployment the gas conversion creates a heat exchange inside the DAB module and that causes connectors to melt. LOCATION It is mounted on the steering column along with the Combi-switch. SRS 23
RkJQdWJsaXNoZXIy MTIwNTUz