PARKING BRAKE CABLE ADJUSTMENT F. Keep Parking brake lever in 0th notch and 1. tighten the parking brake cable adjustment nut through cup holder pocket of center console. Pull Parking brake lever fully and release it for 2. 5 times. If notch position is 4 to 6 then hand brake 3. setting is OK. If notch position is above 6 then tighten the 4. hand brake adjustment nut for getting final notch position. If notch position is below 3 then loosen the nut 5. for getting final notch position. PARKING BRAKE LEVER PRIMARY CABLE G. GREASING Remove Bottle Holder on center console 1. located in the cabin. Remove Wiper cap from Isolator tub, and apply 2. grease inside wiper cap. After applying grease, place wiper cap again on 3. isolator tub. Operate Parking brake lever 3~4 times for 4. smooth functioning. Replace Bottle Holder on center console 5. located in the cabin back to its position. BRAKES 60
RkJQdWJsaXNoZXIy MTIwNTUz