MAINTENANCE OF NORMAL CHARGING GUN The Portable Charger for Normal charging requires no maintenance other than occasional cleaning. Clean the charging gun using a soft cloth lightly moistened with mild detergent solution. Never use any type of abrasive pad, scouring powder, or flammable solvents such as alcohol or benzene. The electrical socket used for EV charging and its associated wiring should be able to supply 15A dedicated load continuously. Do not use charging gun if it is wet in interface area. Allow it to dry before use. State of charge (SoC) gauge for high voltage battery Provided in the instrument cluster as a tell-tale. It shows the charging status of the high voltage battery. Low charge or minimum position on the indicator indicates that there is not enough energy in the high voltage battery. Full charge or max position indicates that the HV battery is fully charged. When the bar turns red on the high voltage charge indicator, the low charge warning lamp turns ON to alert you of the battery level. When the charge percentage is less than 25% in the high voltage battery, the vehicle speed is limited and then eventually the vehicle will be turned OFF. Charge the vehicle immediately. NOTE Once Normal/Fast charging is completed, 90 seconds of time gap is required before the vehicle can be started. After turning off the vehicle, wait for four seconds if you want to start the vehicle again. In emergency charging shutdown conditions, Gun won’t be unlocked. Contact authorised TATA Service Centre. In unforeseeable circumstances if the charging gun is stuck to the socket after charging is done, user has to contact the service personnel. No mechanical override to remove the charging gun is available for user. WARNING To reduce the risk of electrical shock or equipment damage, be cautious while cleaning the connectors and case. CAUTION Changes or modifications to this product by other than an authorized service facility may void SAEJ1772 compliance. HIGH VOLTAGE ELECTRICAL SYSTEM (HV) 33
RkJQdWJsaXNoZXIy MTIwNTUz