Normal Charging procedure: Engage the park brake. (Charging will not start 1. without engaging the park brake). Connect the plug to the AC power socket. 2. DO NOT plug into a power strip. 3. Open the protective cap on Charging Gun. 4. Pull the ‘Charging-inlet Flap Open Lever’ to 5. open the charging inlet flap. Open the protective cap on Charging Inlet. 6. Before connecting the charging gun to vehicle 7. charging socket, make sure the gun lock is released. If the actuator is engaged and the gun is not 8. getting inserted properly, contact TML service center. Remove any dust on the Charging Gun and 9. Charging Inlet. Connect the charging gun to vehicle AC Charging Inlet Switch on the AC supply. 10. Charging Gun will be locked after switching on 11. the AC supply. You will hear a “click” sound, when the gun is connected correctly. CAUTION If the Gun Lock is not released please don’t insert the Charging Gun forcefully into the socket. It may damage the Charging Socket. HIGH VOLTAGE ELECTRICAL SYSTEM (HV) 31
RkJQdWJsaXNoZXIy MTIwNTUz